Introduction – Drylam 27STA Roller Laminator User Manual
Page 7
23220 W. 84
th
St., Shawnee, KS 66227
Phone: (888) 633-1973
Brian Jennett- Tech-Line/Service Manager ext 8575
27STA Instruction manual.docx Page 7 of 24
INTRODUCTION
The DryLam 27STA Laminator, with variable speed and reverse is a reliable, easy-to-use
professional laminator designed to laminate a variety of materials using 25"or 27" laminating
film. The 27STA is capable of lamination from 1 to 9 feet per minute and can be reversed by
the push of a button.
Tension Adjusting Knobs (A)
are conveniently located on
the Supply Mandrels (B) on
the right side panel for easy
access. A Control Panel (C) is
located on the Left Housing
(D), and is equipped with a
Power Button (E) to turn the
machine on, Temperature Up
(F) and Temperature Down (G)
buttons, two Preset buttons
(H), a Motor Start button (I) to
start the motor turning, Speed
Up (J) and Speed Down (K)
buttons to adjust the speed
as necessary, a Motor
Stop/Reverse button (L), a
User Preset button (M) to
save your own settings, and
a Count Reset button (N)
which resets the usage
counter. The Display button
(O) toggles the Display (P)
between 3 settings. The
Feed Tray (Q) and Feed
Guide (R) provide a smooth,
durable paper path and the
Heat Guard (S) protects