Doremi IMS1000 - Manual (Page 6)

4 Calibration
You need to install the packages provided by Doremi Labs for the calibration.
The wizard window will appear as illustrated in the section below. Follow the wizard’s steps.
4.1 Wizard - First Step
The first step is a reminder of the configuration of the DFC100 described above (Figure 2) – see
Section 3.
Figure 2: Wizard Window - First Step
• Click on Next to proceed with the matrix configuration.
IMS.DP.003520.DRM Page 6 of 14 Version 1.0
Doremi Labs