2 preliminary phase, 1 server requirements, 2 required tools – Doremi IMS1000 User Manual
Page 4
2 Preliminary Phase
2.1 Server Requirements
Only a server with proper firmware and software versions can support the Dolby 3D system. To
support this Dolby 3D system, the IMS1000 shall be fitted with the following:
•
SM version 6.0.12 and higher
•
Firmware version 4.2.0 and higher
•
Software version 2.4.4 and higher
2.2 Required Tools
The following tools are required:
1. Dolby calibration update package for IMS1000 (Dolby3D Calibration Wizard-1.0.2)
2. Calibration Digital Cinema Packages
3. File for the Unity matrix (unity.txt)
4. Personal Computer (PC)
5. Spectroradiometer/Colorimeter (Photo Research Model PR655 Recommended)
The first three items are provided by Doremi Labs via email at
For new units, these three items are pre-installed. The unity.txt file can be found in the
/opt directory. For units to upgrade in the field, these three items should be put on a USB stick.
Note: The colorimeter and personal computer are not provided by Doremi Labs.
IMS.DP.003520.DRM
Page 4 of 14
Version 1.0
Doremi Labs