Doremi IMS1000 - Manual (Page 5)

3 Dolby 3D Configuration
The server must establish communication with the DFC100 from Dolby to enable the Dolby 3D
system. This DFC100 must, therefore, be configured on the server, using the following steps:
1. Open a web browser and log in to the IMS1000.
2. Ingest the Dolby Colors package on the IMS1000.
3. Scroll over to the Device Manager page and click on the New button to add the Dolby 3D
device (Figure 1).
4. Once the Dolby 3D device has been selected, it will appear in the Identifier field (Figure 1).
5. Click Save.
6. Proceed to Section 4.
Figure 1: Device Manager – New Device
IMS.DP.003520.DRM Page 5 of 14 Version 1.0
Doremi Labs
Device
Selected
New
Button
Save
Button