Doremi DCP-2000 - Manual (Page 7)

2.2 Dolby CP850 (Audio Processor) Cable Configuration
• Connect an Ethernet cable to the Command port on the CP850 and connect the other end to
the Network Switch. (Refer to Figure 3).
• Connect the Doremi to Dolby audio adapter to the L-com port on the Dolby CP850.
• Connect the audio adapter to the Doremi to Dolby audio adapter on the CP850.
• Connect an ethernet cable to port A (Ch:1-8) on the audio adapter and connect the other end
to the IMB AES port Ch: 1-8. (Refer to Figure 3 & 6)
• Connect an ethernet cable to port B (Ch: 9-16) on the audio adapter and connect it to the IMB
AES port Ch. 9-16.(Refer to Figure 3 & 6)
• Connect the power cable to the power port of the audio processor.(Refer to Figure 3).
D2K.OM.003651.DRM Page 7 of 33 Version 1.1
Doremi Labs
Figure 3: Dolby Audio Processor (CP850)
Power Port
“Input”
Port
“Command”
Port
Port
“A”
Port
“B”
Figure 4: Audio Adapter
Port
“A”
Port
“B”
Figure 5: Doremi to Dolby
Audio Adapter
Male
End
Female
End