Doremi DCP to ShowVault Conversion Procedure - Manual (Page 7)

• Chassis Revision Number and Serial Number Stickers
Figure 13: Revision Number and Serial Number Stickers
2.3 Required Accessories
The following parts are not necessary for this conversion, but are necessary for the physical
installation of the ShowVault with a Series-2 projector. Please refer to the manuals found at
http://www.doremilabs.com/support/cinema-support/cinema-manuals/showvault-imb-manuals/
for the specific ShowVault/IMB manual that pertains to your unit.
• PCI-e Cable, 3 Meters Long (Doremi Part Number: CBL-PCIe-3M)
Figure 14: PCI-e Cable
• GPIO Cable (Doremi Part Number: CBL-GPIO-IMB-OUT-25)
Figure 15: GPIO Cable
• GPIO Cable (Doremi Part Number: CBL-GPIO-IMB-IN-25)
SHV.DP.001547.DRM Page 7 Version 1.4
Doremi Labs