Doremi DCP to ShowVault Conversion Procedure - Manual (Page 17)

Figure 38: Four Screws on the Rear Panel
• Re-tighten the seven screws starting on the rear panel first and then move to the top
This will avoid causing the fan bracket to be improperly placed.
Figure 39: Fan in Place
• Insert the PCI-e card in the PCI-e slot located on the motherboard. Push down slightly
on the card until it clicks into place.
Figure 40: PCI-e Card
SHV.DP.001547.DRM Page 17 Version 1.4
Doremi Labs
PCI-e Card
inserted into
the PCI-e slot