Doremi DCP to ShowVault Conversion Procedure - Manual (Page 13)

Figure 27: Anti-Static Bag
• Unscrew the four nut screws from the VGA/AES card slot on the back of the rear panel.
• Remove the VGA cable and AES card (see Figure 28 below).
Figure 28: AES Card and VGA Cable Removed
• Remove the AES/VGA bracket from the rear panel.
• Take the AES/VGA bracket and lay it face down and place the slot cover (Figure 29)
over it. Tighten the bracket with two M3 screws from the front (Figure 30).
Figure 29: Slot Cover for Bracket
SHV.DP.001547.DRM Page 13 Version 1.4
Doremi Labs