Connections, Supported formats, Cable length – Datapath Vision User Manual
Page 56
Connections
The VisionSDI2 card has four BNC type connectors for two separate, simultaneous inputs and two Loop
Through outputs. The connectors are identified by coloured LED’s; green for input and blue for Loop
Through outputs:
Supported Formats
The VisionSDI2 card supports the following formats:
• SD-SDI (480i/576i)
• HD-SDI (up to 1080i)
• 3G-SDI (upto 1080p)
Cable Length
The VisionSDI2 supports cable lengths of up to 150m for 3G-SDI and 300m for SD-SDI. These figures are
based on using low loss co-ax cables (Belden 1694A).
54