Connections – Datapath Vision User Manual

Page 29

Text mode
Original mode

Connections

The VisionRGB-X2 has two DVI-I type connectors for two separate, simultaneous inputs. The top
connector is referred to as Channel 1, the bottom connector, Channel 2.

Connect to the source using:

• DVI-D Cable

• DVI-A Cable

• Analog VGA (RGB) cable (adapter supplied)

• HDMI cable (adapter supplied)

• Component HD cable (adapter supplied)

Connect one end of the cable to the input source. Connect the other end of the cable to DVI-I type
connector located on the VisionRGB-X2 card in your computer.