Datapath Vision - Manual (Page 37)

Specification - VisionSD8
Board Format 4 lane PCI express 110x170mm (approx)
Connectors Two 26 Way D Connectors
Maximum Capture Resolution 8x 720x576x16bit
Frame Buffer Memory 32MB
Supported Video Formats PAL, NTSC, SECAM or S-Video for SD inputs.
Operating System Support Windows® XP Professional (x86 and x64), Windows® Server 2003
(x86 and x64), Windows Vista® (x86 and x64), Windows® Server
2008 (x86 and x64) and Windows 7
Max Number of Cards per
System 16 (128 capture channels)
Power Requirements Max current at +3.3V – 0.25A
Max current at +12V – 0.6A
Operating Temperature 0 to 35 deg C / 32 to 96 deg F
Storage Temperature -20 to 70 deg C / -4 to 158 deg F
Relative Humidity 5% to 90% non-condensing
MTBF 100,000hrs
Warranty 3 years
Unpacking
Your packing box contains the following items:
• VisionSD8
• BNC16 Input Cable
• Installation CD ROM
If there are any discrepancies, you should contact Datapath immediately.
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its
packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satisfied with
the VisionSD8 video capture card and it is fully installed and working correctly. We also recommend
that you make a note of the serial number of the card in a prominent place before the card is plugged
into the computer. This should hasten any query should you need to contact our Technical Support
Department. The serial number is displayed on the card itself and the box label.
35