Dataman 530 Series - Manual (Page 36)

DATAMAN 530 series AWG
User’s Guide
- 36 -
Frequency setting step < 0.003% from actual value
Frequency accuracy 0.01% from actual value
Maximum output update rate 100 000 000 samples/s
Output waveform period length 2mHz to 50MHz *
Modes of operation Periodic, single or triggered
Table 6.2.1. – Waveform generation
* - The period consists of two points, when period length is 50MHz
6.3. Synchro
Trigger input 3.3V CMOS compatible
Trigger input threshold voltage about 1.6V
Trigger input maximum input range -10V to +13V
Trigger output 3.3V CMOS compatible
Table 6.3.1. – Synchro
6.4. Power
Power sources - USB interface via USB cable
- In order to activate high voltage output
(H), auxiliary 10V to 18VDC power
supply is required (wall adaptor is the part
of the package).
Power consumption - max. 480mA from USB
- 1.2W to 2.25W from auxiliary power
supply (depending on the output voltage
and load of the high voltage output)
Table 6.4.1. – Power
6.5. Mechanical characteristics
Dimensions with no feet and connectors 165 x 111 x 35 mm
Dimensions with feet and connectors 182 x 111 x 39 mm
Weight 530 g
Table 6.5.1. – Mechanical characteristics