Dataman 448Pro - Manual (Page 23)

Note: Menu is depends on a device.
9. Save project: click on and select destination folder, write a description of
project etc.
For more details see Help for PG4UW or “User manual for Dataman-48Pro”. Latest
manual you may find it on
www.dataman.com part download.
Production mode
This part of the software is focused to the easy monitoring of high-volume production
operations.
Operator-friendly control software (Pg4uwMC) combines many powerful functions with
ease of use. Graphic user interface provide overview of all important activities result
without burden of operator with non-important details.
There is used a project file to control the Dataman-448Pro multiprogramming system.
Project file contains user data, chip programming setup information, chip configuration
data, auto programming command sequence, etc. Therefore the operator error is
minimized, because the project file is normally created and proofed by engineering and
then given to the operator. The optional protected mode can be set for project file to
avoid unwanted changes of the project file.
Each chip may be programmed with different data such as serial number,
configuration and calibration information.
23