Hardware setup, New versions of programmer software – Dataman 448Pro User Manual
Page 16
Step 8.
Click “Finish” button to finish setup.
New versions of programmer software
In order to exploit all the capabilities of programmer we recommend using the latest
version of PG4UW. You may download the latest version of programmer software (file
PG4UWARD.exe) from our Intern
part download.
Copy PG4UWARD.exe to a temporary directory, disconnect Dataman-448Pro from PC
and then launch it. Setup will start with Step 2 from previous chapter.
Hardware setup
Step 1.
Directly connect USB cable to type B USB port on programmer.
Step 2.
Directly connect USB cable to type A USB2.0 port on PC (high-speed recommended).
Step 3.
Connect connectors of power supply cable to appropriate connectors on programmer
and wall plug.
Step 4.
Turn on programmer. At this time all 'work result' LEDs light up successive and then
LEDs switch off.
16