CUE smartCUE - Manual (Page 4)

User Manual Interfaces
www.cuesystem.com
Page 4 of 44
1. Introduction
1.1. Overview ....................................................................
The smartCUE interface is equipped with four serial or IR channels and allows control of devices that
are equipped with infrared, RS-232, RS-422 or RS-485 serial channels. A MIDI version is also
available.
The soundCUE is a fi ve-input / two-output audio matrix switcher capable of switching four stereo
unbalanced line inputs and one mono microphone input to two independently switched outputs. Each
matrix output is composed of two parallel stereo unbalanced line outputs. The soundCUE enables
control of volume, bass and treble independently for each matrix output. The status of the soundCUE
is indicated on the front panel.
The analogCUE is a 32-channel analog output interface. Each independent 0 - 10 V analog output
enables control of VCA, light dimmer, hydraulic or pneumatic valve type devices. The front panel
ncludes LED indicator for each output.
The auxCUE is a 16-channel relay interface capable of switching 16 independent relay outputs, max.
24 V. Switches located on the front panel allow each relay to default in either the open or closed
position. The front panel includes LED indicator for each relay.
1.2. Models........................................................................
Model Product code Description
smartCUE CS0008-R IR and serial interface
smartCUE CS0008-M IR, MIDI and serial interface
soundCUE CS0009 Audio switcher incl. volume, bass and treble control
analogCUE CS0004 (32) analog outputs 0 - 10 V
auxCUE CS0005 (16) relays 24 V
1.3. Features .....................................................................
• Full compatibility with Cue’s control units and other interfaces
• CUEring data input and output
• Channel activity LED indicators on the front panel
• Buttons on the front panel
• Metal
enclosure
• Mountable into 19 “ rack, 1 U rack space
1.4. Programming .............................................................
All interfaces are programmed using Cue Director programming tool.