CUE Reservation System - Manual (Page 7)

User Manual
Page 7
www.cuesystem.com
[email protected]
Cue Reservation System
Software Components
Cue Exchange Connector
It is a special service running on ipCUE-omega. This service makes a bridge between the CUE control
system and Microsoft Exchange Server.
The Cue Exchange Connector is pre-installed on ipCUE-omega and there is no need to configure it.
CRSServer (driver)
This driver is the core of CRS – it communicates with Microsoft Exchange Server (through Cue Exchange
Connector) and provides data to all graphic objects.
File: CUE_CRSServer_CRS_MSEx2007_Tcp_Client_x.xx.cvcd
CRSOverviewUI (graphic object)
This graphic window type object is used to display the data of all rooms, for example in a lobby or
reception. The instance of this graphic object is typically created in ipCUE-omega, whose video output
is connected to the lobby monitor. This graphic object requires the CRSOverviewInterface module.
CRSOverviewUI can run on touch panel or other CUE units with graphic output with resolution from 640 x
480 pixels to 1920 x 1080 pixels.
The number of displayed lines depends on monitor resolution. If it is possible to show all room lines on
the screen, all room lines are static. If the number of rooms is higher than the maximum number of lines,
room lines will automatically scroll to show all room data sequentially.
File: CRSOverviewUI_x.xx.cvcg
CRSOverviewInterface (module)
CRSOverviewInterface joins the functions of graphic object and driver CRSServer.
File: CRSOverviewInterface_x.xx.cvcm
CRSRoomUI (graphic object)
This window-type graphic object is used to display data of a single room, for example in the touch
panel close to the entry door or in the touch panel inside the room. This graphic object requires the
CRSRoomInterface module. CRSRoomUI requires a touch panel with a resolution from 640 x 480 pixels to
1280 x 800 pixels.
File: CRSRoomUI_x.xx.cvcg
CRSRoomInterface (module)
CRSRoomInterface joins the functions of a graphic object and driver.
File: CRSRoomInterface_x.xx.cvcm
CRSDeclarations (applet)
CRSDeclarations contains program declarations common for whole CRS project.
File: CUE_CRSDeclarations_x.xx.cvcl
BasicKeyboards (graphic object)
BasicKeyboards contains keyboards used in the project. This is part of standard CVC installation.
File: BasicKeyboards_x.xx.cvcg