CP Electronics VITMR-MWS6-PRM - Manual (Page 8)

8
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Technical data
Part numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
Ref: #WD592 Issue 3
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
VITMR-MWS6-PRM
DBB
Part number Description
Detector VITMR-MWS6-PRM Microwave Presence/Absence Detector IR with Ceiling Rose
Accessories DBB Surface mounting box
UHS5 Programming IR handset
UNLCDHS Universal LCD IR handset
Dimensions See diagrams opposite
Weight 0.5kg
Supply Voltage 230VAC +/- 10%
Frequency 50Hz
Maximum Load 10A of lighting and/or ventilation
including incandescent, fluorescent,
compact fluorescent, low voltage (by
switching the primary of transformer).
Power consumption On 1100mW, Off 665mW
Temperature
-10ºC to 35ºC
Humidity 5 to 95% non-condensing
Material (casing) Flame retardant ABS and PC/ABS
Type Class 2
IP rating IP40
Microwave frequency 5.8 GHz
Safety
The microwave radiation emitted
by these units is extremely low
power and complies with ANSI
standard “IEEEC95.1-1999
Standard for Safety Levels with
Respect to Human Exposure to
Radio Frequency Electromagnetic
Fields 3kHz 300GHz.”
Compliance
EMC-2004/108/EC
LVD-2006/95/EC