CP Electronics VITM4-2CH-2S - Manual (Page 2)

2
 All wiring should be mains rated.
 Remove wiring compartment cover.
 Wire the box using the diagrams below
Switched live turns the lights on and off
 Use the cable clamps to secure the wiring or use cable glands
(not supplied). The clamps can be split, and flipped over to
clamp different cable diameters.
 Replace wiring compartment cover.
 Plug in the luminaires ensuring that the connector latches to
the box.
Small
cables
Large
cables
Cable clamps
Permanent Live 1
Neutral 1-Supply in
Earth
Live 1-Switched
Live 2-Switched
Neutral 2-Supply in
Permanent Live 2
Live 1-Supply in
Live 2-Supply in
Sensor
Detector lead needs to be ordered separately from the
detector. Order code VITM4-L3-2CH-2S.
Where two detectors connect to a single box a dual
lead is available VITM4-LD3-2CH-2S.
CH1 and CH2 plugs are coded.
Ensure that the plugs are
inserted correctly and do not
apply excessive force
Channel 1 Channel 2
Luminaire connections / Lead colours
Permanent Live Black (4 core only)
Neutral Blue
Earth Green / Yellow
Switched Live Brown
Wiring
Connecting a detector