COMMELL MPX-2515 - Manual (Page 28)

Commell MPX-2515 User’s Guide Rev 0101
Taiwan Commate Computer Inc. 28
7 CAN_H CAN HIGH
8 N/C No Connect
9 N/C No Connect
Table 6 OAL-2515 D-SUB9 Male Pin Outs
1.11 OALUSB-H4-1 Cable
The OALUSB-H4-1 cable is used to connect the MPX-2515 CAN 2.0B USB card to
a USB host Type A receptacle. The following figure shows its drawing.
Figure 25 OALUSB-H4-1 Drawing
1.12 OALUSB-H4 Cable
The OALUSB-H4 cable is used to connect the MPX-2515 CAN 2.0B USB card to a
USB host pin header on the motherboard. The following figure shows its drawing.
Figure 26 Cable OALUSB-H4 Drawing
Please be noted that the P1 end connects to a USB host pin header on a motherboard
while P2 end connects to the CN_USB connector of MPX-2515 card.