COMMELL MPX-2515 - Manual (Page 27)

Commell MPX-2515 User’s Guide Rev 0101
Taiwan Commate Computer Inc. 27
1.10 OAL-2515 Cable
OAL-2515 cable is used to connect the MPX-2515 CAN 2.0B USB card to the CAN
bus. This cable has D-SUB9 standard connector for CAN bus. The OAL-2515 cable
is compliant to CiA 303 CANopen Recommendation Par1 Cabling and connector pin
assignment.
The following figure shows the drawing of OAL-2515 cable. Please refer to the
GSE1205001.pdf (comes in the product CD) for detail information.
Figure 23 OAL-2515 Drawing
The 9-pin D-SUB male connector is used to connect to a CAN bus network. The
following figure shows the 9-pin D-SUB male connector pin outs.
Figure 24 D-SUB Male 9-Pin Connector
The following table defines the pin outs of the 9-pin D-SUB connector for CAN bus.
PIN NAME DESCRIPTION
1 N/C No Connect
2 CAN_L CAN LOW
3 CAN GND CAN Ground
4 N/C No connect
5 N/C Optional CAN_SHIELD
6 CAN GND Optional CAN Ground