COMMELL FS-97C - Manual (Page 36)

FS-97C User’s Manual Hardware Setup
GPIO Interface 36
2.15
The JFRNT provides front control panel of the board, such as power button, reset and
beeper, etc. Please check well before you connecting the cables on the chassis.
Connector: JFRNT
Type: onboard 14-pin (2 x 7) 2.54-pitch header
Function Signal PIN Signal Function
Vcc (+) 1 2 (+) Vcc
IDE LED
Active 3 4 N/C
Reset 5 6 GND
Power
LED
Reset
GND 7 8 Vcc
N/C 9 10 N/C
PWRBT 11 12 N/C Power
Button GND 13 14 SPKIN
Speaker
1
14
JFRNT
2
13