CIRCUTOR CPM (Available until stocks) - Manual (Page 9)

--------- MULTIMETER CURRENT CLAMP CPM -------- PG No. 8
-
2.- SAFETY REQUIREMENTS
2.1.- General
This equipment can be used in environments of Pollution Degree 2.
Overvoltage Category: See sections 2.2 and 2.3.
In order to ensure safety only the following specified types of the accessories
must be used:
Test probes:
Always keep the specified ranges in mind for both power supply and
measurement.
Obey the maximum environmental conditions specified for the apparatus at
all times.
Remember that voltages higher than 60 V DC or 30 V AC rms are potentially
dangerous.
The operator is only authorized to intervene for: Battery replacement
Specific instructions for these interventions are defined in the Maintenance
section.
Any other change made to the equipment must be done exclusively by
specialized personnel.
Strictly follow the cleaning recommendations that are described in the
Maintenance section.