Using your system – Directed Electronics 732T User Manual

Page 8

and Button

An optional auxiliary convenience or expansion function that you

have added to your system can usually be controlled by pressing

and

simultaneously. These button assignments can be

changed if needed, such as for two-car operation from one remote.

The auxiliary output controls _____________________________.

Using Your System

You can turn on, or arm, the system by pressing

of your trans-

mitter for one second. When the system arms, you will hear a short

siren sound, or chirp, and see the parking lights flash once. If the

vehicle’s power door locks are controlled by the system, the doors

will lock. While the system is armed, the Status LED will flash

about twice a second, showing that the system is actively pro-

tecting your vehicle. If you hear a second chirp after arming and

see the Status LED flashes in groups, see Diagnostics section. This

extra chirp is called Bypass Notification. The system also can be

programmed to arm itself automatically (called passive arming). If

the system is programmed for passive arming, it will automatically

arm 30 seconds after the ignition is turned off and the system

"sees" you leave the vehicle by opening and closing a door.

Whenever the system is in its 30 second passive-arming count-

Arming