Directed Electronics 732T - Manual (Page 7)

The system requires no specific maintenance. Your remote is pow-
ered by a miniature 12V battery, type GP23A, that will last approx-
imately one year under normal use. When the battery weakens,
operating range will be reduced and the LED on the remote will dim.
Transmitter Functions
The receiver uses a computer-based Learn Routine to learn the trans-
mitter buttons. This makes it possible to assign any transmitter
button to any receiver function. The transmitter initially comes pro-
grammed with Standard Configuration, but may also be customized
by an authorized dealer. The buttons in all of the instructions in
this manual correspond to a Standard Configuration transmitter.
Button
The arm/disarm and Panic Functions are usually controlled by Button I.
Button
The Silent Mode, trunk release and Remote Valet functions are usu-
ally controlled by Button II. (Silent Mode and Remote Valet work by
pressing Button II for less than one second. Trunk release requires
you to press Button II for 1.5 Seconds.)
Standard Configuration
System Maintenance
4 © 2000 Directed Electronics, Inc.