Quick reference guide – Directed Electronics 732T User Manual

Page 24

Cut along dotted line and f

old f

or a quick and eas

y r

efer

ence to k

eep in y

our pur

se or w

allet.

✂ ✂

✂✂

QUICK REFERENCE GUIDE:

Arming

■ Press

for one second. When the system arms, you will hear a short

chirp, and see the parking lights flash once. If the vehicle’s power door

locks are controlled by the system, the doors will lock.

Arming while driving

■ Press

while the vehicle is running. The system will chirp once and

then once more to indicate that the ignition is on

Disarming

■ Press

. You will hear two chirps, and the parking lights will flash

twice. If power locks are controlled by the system, the doors will unlock.

Disarming without a transmitter

■

Turn on the ignition. Push the Valet switch within 15 seconds. The sys-

tem should now disarm. If it does not, you may have waited too long, so

turn the ignition off and on and try again.

Silent Mode

™

■ Press

briefly before arming or disarming, and the confirmation chirp(s)

will be eliminated for that one operation only.

Panic Mode

■ Press

for 1.5 seconds, and you will enter Panic Mode. The siren will

sound and the parking lights will flash for 30 seconds

To enter or exit Valet Mode with the Valet switch

■

Turn ignition to "run" position, then turn to "off" position. Press and
release the Valet switch within 10 seconds. The Status LED will light
steady if you have entered Valet Mode, and it will go out if you exited
Valet Mode.

Using Remote Valet as you enter or exit the vehicle:

■ Open any door. Press

. Press

again. The Status LED will

light steady if you have entered Valet Mode, and it will go out if you exit-
ed Valet Mode.