Directed Electronics 732T User Manual

Page 11

This feature allows you to disarm the system without the trans-

mitter should it be lost, damaged or disabled. In order to disarm

without a transmitter, you must have the vehicle's ignition key

and know where the Valet switch is located. Be sure to check with

the installer for the location of the Valet button.

Turn on the ignition. Press the

Valet switch within 15 seconds.

The system should now disarm.

If it does not, you may have

waited too long to press the

Valet switch, so turn the igni-

tion off and on and try again.

To temporarily turn off the arm or disarm chirps, use Silent Mode

™

Simply press

briefly before arming or disarming, and the con-

firmation chirp(s) will be eliminated for that one operation only.

If you want the arm/disarm chirps turned off permanently, your

dealer can do this for you.

NOTE: The Warn-Away response to lighter impacts is bypassed if the sys-
tem is armed using Silent Mode. This ensures that no chirps will be emit-
ted by the siren in an area you want chirp-free. The system is still fully
able to trigger. Only the Warn-Away response is defeated.

Silent Mode

DRW-35

Disarming Without a Transmitter