Brennenstuhl Aluminium Double-Sided Stepladder special trade quality 2x2 rungs Height of stepladder 0,7m - Manual (Page 18)

18 GB
Positioning and erecting of the ladder
Standing possibilities:
q
Multi ladder, 3 parts
b
c d
65°-75°
a
Standing possibilities:
Straight ladder:
i Mount the cross foot 6 (see Fig. d ).
i Make sure that the rung hooks 12 and the
lifting lock 13 are engaged.
NOTE: An angle of 65° to 75° to the
horizontal must be kept (see Fig.
a ).
Stepladder:
i Mount the cross foot 6 (see Fig. d ).
i Lift both sliding parts and spread them.
i Insert the two upper retaining pins (see Fig. b )
into the hinge stop slots.
i Open the ladder until the holding belts are
pulled tight (see Fig.
c ).
q
Multi ladder, Premium, 3 parts
b
65°-75°
a c
e f
g
d
Straight ladder:
i Make sure that the rung hooks 12 and the
lifting lock 13 are engaged.
NOTE: An angle of 65° to 75° to the
horizontal must be kept (see Fig.
a ).
Stepladder:
i Lift both sliding parts and spread them.
i Insert the two upper retaining pins (see Fig. b )
into the hinge stop slots.
i Open the ladder until the holding belts are
pulled tight (see Fig.
c ).
i Bolt the side cross bar to the supporting part
(see Fig.
d ).
Stepladder with attached extension
ladder up:
i Bolt the side cross bar to the supporting part
(see Fig.
d ).
NOTE: When the sliding part is extended, at
least 3 rungs must overlap.
Leitern_Content_DE_GB_FR_NL_IT.indd 18 23.07.14 13:44