Brennenstuhl Smoke Alarm BR 1211 interlink - Manual (Page 20)

Roof peak In areas with sloping and
peaked roofs, the smoke alarm
must be mounted 90 cm from
the highest peak, since air does
not move in the slope/point.
This results in the smoke being
detected too late.
NOTE:
Mounting on a roof beam is ideal.
Installation and set-up of smoke alarm
NOTE: The enclosed mounting equipment is
suitable for concrete slabs. For other subsurfaces,
suitable mounting equipment should be purchased
from a specialty shop.
NOTE: An alarm can simply be stopped by
removing the battery from the battery clip.
The smoke alarm is powered by a battery and
needs no other electical power supply.
Mute function
Press the test-/mute function button in order to
20
Operating Instructions BR 1211
Smoke
052009 Rauchwarnmelder BR 1211_052009 BA_Rauchwarnmelde