beautypg.com

Installation, Wall mounting, Belt clip – Doro 930R User Manual

Page 6: Battery, Turning the handset on/off

background image

English

6

www.doro.com

66

Installation

Wall mounting

The base unit can be wall mounted. Attach the enclosed wall bracket to the

underside of the base unit. A click will be heard as it locks into place. To remove

the wall bracket, press the plastic button on the underside of the base unit.

Belt clip

A belt clip is fi tted to the back of the handset, allowing the handset to be attached

to a belt, shirt pocket or similar.

Battery

The telephone is supplied with environmentally friendly nickel metal hydride

(NiMH) batteries – 2 x AAA 1.2V. As with all batteries, performance may degrade

over time; should you notice that the standby time has reduced considerably or

there are signs of leakage, the battery pack should be replaced.

Fully charged batteries will last for approx. 170 hours in standby or approx.

12 hours’ call time. These operation times apply at normal room temperature.

Completely discharged batteries will take about 10 hours to fully recharge.

Please note that the battery charge indicator in the handset display fl ashes while

charging and will stop when the battery is fully charged. The indicator

7

on the

base unit will stay lit as long as the handset is located in the base unit, it does not go

out when the battery is fully charged.

The base unit has an automatic charging mechanism that prevents the batteries

from being overcharged or damaged by prolonged charging.

Please note!

The recharging system used in this model may result in the handset and the batteries warming up.

This is normal and will not harm the equipment.

When the telephone is installed for the fi rst time, the batteries must be charged for 24 hours before

using the telephone. Use original batteries only. The guarantee does not cover any damage caused

by incorrect use of batteries. Please dispose of any batteries in a responsible and environmentally

friendly manner.

Turning the handset On/Off

Press and hold the

!

button for a few seconds to turn the handset off or on.

When the handset is turned off, no calls can be made or received. The handset

is designed to be always turned on, i.e. it is not necessary to turn it off overnight.

However, we recommend turning the handset off if it is not to be used for a

prolonged period of time, e.g. during a holiday. If the batteries run low, the handset

will turn off.