D-Link DI-704P - Manual (Page 20)

-20-
5. PPTP
Just follow steps below to configure the PPTP WAN type:
•
Set My IP Address as the IP address that the ISP assigned to your PC,
e.g. 10.0.0.140.
•
Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g.
255.255.255.0.
•
Set Server IP Address as the IP address of the DSL modem, e.g.
10.0.0.138.
•
Input the PPTP Account and Password.
•
Input the Connection ID if your ISP requires it.
•
Save the setting and restart the router.
•
In the Command prompt, type PING 4.0.0.1. If the reply is positive,
the router and your PC have been successfully configured for PPTP
WAN type.