D-Link DI-704P - Manual (Page 18)

-18-
Setup
Before you begin the Setup, you must choose the correct WAN type.
1. LAN IP Address: the DI-704P’s IP address. The default address is
192.168.0.1. You can change the LAN IP Address if needed.
2. WAN Type: your ISP’s WAN Connection type. Click the Change button to
choose from the following five options:
A. Static IP Address: you manually input the IP Address that your ISP
assigned to you.
B. Dynamic IP Address: Obtain an IP address automatically from the
DI-704P’s DHCP Server function.
C. PPP over Ethernet: Some ISPs require the use of PPPoE to connect to
their services.
D. Dial-up Network: To surf the Internet via PSTN/ISDN (a dial-up
modem.)
E. PPTP: Some ISPs require the use of PPTP to connect to their services.
It is specifically for many European ISPs where Alcatel’s ADSL
Network Termination is deployed.