AXING SKP 2-10 User Manual

Page 5

Text mode
Original mode

Operation Instructions SKP 2-10

Chapter 1: Common

16.02.12

1.2.1

Display elements and connections

1. Programming selection switch (main channel– position left, sub channel – position right). After

completed programming, the switch must be in center position!

2. Display channel number
3. Display point special channels
4. LED display MPEG data stream

Orange = MPEG data stream present, Off = MPEG data stream not present

5. SAT IF input
6. USB input for software update
7. RF output and DC input (for installation in basic unit)
8. DC input/output (only for single operation)
9. DC input/output (for the power supply of three more SKP 2-10 twin modules in single operation and

not in SKS x-xx)

10. Audio/Video outputs (cinch/RCA) for monitor connection
11. Infrared receiver
12. Grounding screw
13. Fan

Fig. 2: Display elements and
connections