AXING SKP 2-10 User Manual
Page 12
Operation Instructions SKP 2-10
Chapter 3: Programming
12
© AXING AG • Swizzerland • Reserving change in design and type
16.02.12
The picture below shows all possible options of the configuration menu.
Selection submenu Audio Language
With VOL
/ VOL
preset languages are selected (The broadcasting service must support the
selected language).
Selection of regional windows in the sub menu Subtitles Language
By means of VOL
/ VOL
you can switch to this regional window if these channels offer a so-called
regional window.
OFF: As soon as the selected channel offers a regional window, the channel switches over to it during
transmission; after having closed the regional window, the main program runs again.
eng or another language code: The regional window is ignored; the main program of the corresponding
channel is always transmitted.
Selection submenu Control Mode for Scan
With VOL
/ VOL
, the desired LNB setting is selected. This setting is used during satellite scanning.
The following selection is possible:
Low vertical, low horizontal
High vertical and high horizontal.
Universal LNB
Toneburst
DiSEqC 1.0
DiSEcQ 1.0 - A • DiSEcQ 1.0 - B
DiSEcQ 1.0 - C • DiSEcQ 1.0 - D
In case of a Single-LNB, the selection must be set to "Universal LNB".
.
Fig. 13: Possible settings
Fig. 14: Audio menu