AXING SKP 2-10 - Manual (Page 11)

Operation Instructions SKP 2-10
Chapter 3: Programming
16.02.12 © AXING AG • Swizzerland • Reserving change in design and type 11
3.3.1 Channel list
Select the menu item “Channel list” and confirm with OK. If a pre-programmed channel list is included
within the module, the following selection appears.
On this list all pre-programmed channels appear with the current position of the satellite (A, B, C or D),
transponder frequency, band information, name of the channel as well as program status (FTA/CA).
To be able to display encoded (CA = Conditional Access) programs, please use our twin module
SKP 2-00 with CI slot.
The desired receiving channel can be selected using the CH ▲ /CH ▼ keys or by scrolling
using / .
After pressing the OK key, the channel is applied, the menu closed and the image displayed.
By pressing the EXIT key, the menu is closed without accepting the receiving channel.
3.3.2 Info
Select menu item “Info” and confirm with OK.
The current software as well as the serial number of the module are displayed.
3.3.3 Configuration
Select menu item “Configuration” and confirm with OK.
Fig. 10: Channel list
!
Fig. 11: Info
Fig. 12: Configuration