Edid set up – Atlona AT PRO3HD66M User Manual
Page 9
9
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
To save an I/O route to memory
To load a saved I/O route
Feedback =
”Memory # saved”
Feedback =
”Memory # loaded”
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
AT-PRO3HD66M
Select Input Number
AT-PRO3HD66M
Select Input Number
Select Function Option
Select Function Option
1 Save in/out route
2 Select memory route
1 Save in/out route
2 Select memory route
Save to memory (1-6) #
Press enter
Select Memory route 1-6
Press enter to load
home screen
home screen
memory selection
memory selection
Once inputs and outputs have been set they can be saved to memory and recalled later. Up to 6
individual input/output routes can be saved. The route will remain in memory until a new route has
been saved to that memory number or the matrix has been factory reset.
Once an input/output route has been saved, it can be loaded at any time.
I/O Route Memory
O: 1 2 3 4 5 6
I : 4 6 1 3 2 6
example route
When the matrix is completely connected and turned on it will load the default EDID, which is the
highest common native resolution of the devices. (i.e. In the diagram below the default would be
720p with 2ch audio. Multi-channel audio and 3D are not enabled on internal mode, unless
all devices have these features.)
EDID Set Up
Output 2
Output 3
Input 2
1080p-Dolby TrueHD (3D)
Input 1
Output 1
720p-2ch
720p-2ch
1080p (3D)-2ch
1080p-Dolby TrueHD (3D)
DC 24V
BACKUP
MAIN
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
MATRIX OUT
RS-232
FW
LAN
HDMI IN
HDMI OUT
HDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1
2
3
4
5
6
AT-PRO3HD66M
AT-PRO3HD66M
1
2
3
4
5
6
EDID
IR
INFO
DEFAULT
ALL
MEMORY
FCN
CANCEL
POWER
ENTER
B
M
On default, all devices in the diagram will work at 720p. If a device is not syncing or a different
resolution is required, internal EDID or EDID copy and load should resolve these issues. The
PRO3HD66M can copy up to 6 EDIDs to memory.
through
through