Atlona AT PRO3HD66M - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
DC 24V
BACKUP
MAIN
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
MATRIX OUT RS-232 FW
LAN HDMI IN
HDMI OUT HDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1 2 3 4 5 6
AT-PRO3HD66M
AT-PRO3HD66M
1 2 3
4 5 6
EDID IR INFO
DEFAULT ALL MEMORY
FCN CANCEL
POWER ENTER
B M
Back Panel
1. Firmware Update - Type B USB Port used for updating matrix firmware
2. RS-232 - Connect to this port for control from a computer or 3rd party control box.
3. Matrix IR In - Used to control matrix I/O switching from a 3rd party IR control box.
4. Matrix IR Out - Global output, combines IR for all incoming zones.
5. Zone dedicated ports
a. IR 3.5mm mono In ports: Used in conjunction with 3rd party IR control box to extend IR
control commands to video displays over category cable.
Note: Be sure you’re using a mono to mono 3.5mm IR cable for 3rd party control boxes,
3.5mm stereo cables are not compatible.
b. IR Out ports: Sends IR signal to sources through a 3.5mm IR emitter
c. Coax Out (S/PDIF): Audio de-embedding for distribution amplifiers and AVRs.
Compatible with PCM 2Channel, Dolby 2.0, Dolby Digital 5.1, and DTS 5.1.
d. CAT5e/6/7 Out (RJ45): Extends video and bidirectional RS-232, IR, and audio signals
through a single category cable.
e. HDMI Out: Mirrored HDMI output
6. Main Power Port - Use included locking DC adaptor to power the matrix switcher
7. LAN Port - For TCP/IP matrix control
8. HDMI Input Ports - Connect HDMI sources into these ports, such as DVD players, Blu-ray players,
computers, etc.
9. Back Up Power Port - Redundant power supply (AT-PW24V6.25A available at atlona.com)
1 2 3 4
7 8 a b c e d 9
6 5