Panel description, Front panel, At-pro3hd66m select input number – Atlona AT PRO3HD66M User Manual
Page 4
4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
DC 24V
BACKUP
MAIN
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
MATRIX OUT
RS-232
FW
LAN
HDMI IN
HDMI OUT
HDMI OUT
MATRIX IN
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
COAX OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
IR IN
IR OUT
CAT5e/6/7
1
2
3
4
5
6
AT-PRO3HD66M
AT-PRO3HD66M
1
2
3
4
5
6
EDID
IR
INFO
DEFAULT
ALL
MEMORY
FCN
CANCEL
POWER
ENTER
B
M
Panel Description
Front Panel
1. Power Button - Cycles the power between On (blue backlight) or Standby (red backlight) mode.
2. Enter Button - Use to view current status for inputs and outputs or to confirm a command.
3. IR Receiver Window - Receives the signal from the included IR Remote Control or a 3rd party
control box.
4. Function Button - Select for command options. (blue backlight when selected)
a.
Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)
b. All: Save a single input to all the outputs with this function
c. Memory: Save/load the current input and output route to memory
d. EDID: Save/Load EDIDs to individual inputs
e.
IR: Turn IR receiving on/off (see below)
f.
INFO: Displays the firmware version on the front display
5. Cancel Button - Within the functions menu use to go back one screen or to the home screen.
Note: You cannot power off or change functions unless you return to the home screen.
6. Number buttons - Use these buttons to select input and output paths or use with the function
button to change matrix settings.
3
4
2
a b c
d e
f
1
5
6
The IR receiver window can sometimes pick up stray reflected IR commands causing loss of
functionality. To disable the front panel, see directions below:
IR
--->
--->
--->
AT-PRO3HD66M
Select Input Number
home screen
Select Function Option
--------------------
--->
Select IR 1:On 2: Off
Current: On/Off
Select IR 1: On 2: Off
Current On
Select IR 1: On 2: Off
Current off
--->
--->
--->
--->
--->
--->
Feedback=
”IR On Selected”
Feedback=
”IR Off Selected”