Atlona AT PRO3HD66M - Manual (Page 3)

3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Introduction
With the latest and more affordable HDBaseT ® technology extend HDMI ® sources up to 230ft over
category cable. The Atlona HDMI 6 by 6 Matrix Switcher allows for effortless control of up to 12
devices through IR, RS-232, TCP/IP and the front panel. With built in S/PDIF ports send audio to an
AVR or distribution amp. To ensure all audio passes through, the 6 by 6 Matrix Switcher supports
all Lossy and Lossless formats of Dolby
® and DTS™ over HDMI.
Package Contents
Features
• 1 x AT-PRO3HD66M
• 1 x
24V/6.25A DC adaptor
• 1 x Power cord
• 1 x IR Extender
• 7 x IR Emitter
• 1 x Remote control
• 1 x Pair of dual purpose wall/rack mounts
• 1 x User
Manual
• HDBaseT allows IR, RS-232, audio and visual signals to pass over a single category cable.
• Latest feature of Power over Category cable (PoCc™) enables the matrix to power all compatible
receivers.
• IR ports for zone dedicated control through IR remote control and 3rd party control boxes.
• Programmable I/O memories, save I/O routes for faster switching to the most commonly used
configurations.
• EDID™ learning function for up to 6 video display EDIDs.
• Built in internal EDID mode provides 12 individual EDIDs to ensure compatibility when using DVI
projectors or trying to route digital multi-channel audio through an S/PDIF port
• Multiple control options such as RS-232, IR, TCP/IP, and the front panel.
• Dolby
® TrueHD and DTS-HD Master Audio™ pass through HDMI output interface.
• Compatible with DVI/D (with DVI/D to HDMI adapter such as AT14050), allowing DVI/D to be
passed to displays.
• Mirrored HDMI outputs on zones 5 and 6 for in room displays or AVRs
• Built in S/PDIF audio de-embedding for AVR or audio distribution amplifiers.
Compatible with PCM 2Channel, Dolby 2.0, Dolby Digital 5.1, and DTS 5.1.
• Optional redundant power supply (AT-PW24V6.25A) in case the main power supply fails.
• HDCP compliant
Before You Start
• Make sure when connecting a category cable a 568B termination method is used.
• Make sure the matrix is connected to a component surge suppressor with line conditioning.
Note: Atlona’s warranty does not cover damage due to electrical disturbances. A component surge
suppressor with line conditioning is highly suggested, especially in areas with electrical
storms.
• Be sure you’re using a mono to mono (2 conductor) 3.5mm IR cable when using IR output
control from 3rd party control boxes, stereo (3 conductor) 3.5mm cables are not compatible.