Dynex DX-L321-10A - Manual (Page 21)

Setting parental controls
17
4 Enter the PIN again. The Locks menu opens.
To change the parental controls PIN:
1 Press MENU on the remote control, or MENU on the control
panel of your TV. The on-screen menu bar opens.
2 Press or to highlight Locks, then press ENTER. The Enter
PIN box opens.
3 Using the number keys, enter the original four-digit PIN number.
(If you have forgotten the original PIN, you need to perform a
Reset All, from the Settings menu. Key in 9999 when prompted.)
The Enter New PIN box opens.
4 Using the number keys, enter a new four-digit PIN number. Write
this number down so you don’t forget it. You are prompted to
enter the number again to confirm it.
Setting parental control levels
To set parental controls:
1 Press MENU on the remote control, or MENU on the control
panel of your TV. The on-screen menu bar opens.
2 Press or to highlight Locks, then press ENTER. The Enter
PIN box opens.
3 Using the number keys, enter the PIN number you set. The Locks
menu opens.
4 Press or to highlight Ratings Locks, then press ENTER.
The Ratings Locks menu opens.
5 Press or to highlight your location (USA or Canada), then
press ENTER. One of the following menus opens, depending on
which location you selected.
6 If you selected USA, press or to highlight USA - TV or
USA-Movie, then press ENTER.
- OR -
If you selected Canada, press or to highlight CAN - French
or CAN - English, then press ENTER.
The ratings panel for the sub-menu you selected opens.
7 Press , , , or to select a rating box.
8 Press ENTER to block the rating of your choice.
DX-L321-10A_09-0407_MAN_ENG_V3.book Page 17 Wednesday, May 13, 2009 11:38 AM