Connecting a vcr – Dynex DX-L321-10A User Manual

Page 12

Making connections

2 Connect one end of a coaxial cable (not included) to the RF OUT

jack on the antenna or on the cable or satellite TV box. If you are
using an antenna with twin-lead cable, you may need a
300-75 ohm adapter (not provided) to connect it to the back of
your TV. Likewise, if you are using several antennas, you may
need a combiner (not provided).

3 Connect the other end of the cable to the ANT/CABLE IN jack on

the back of your TV.

Notes:

Use a coaxial cable to eliminate interference and noise from radio waves.

Do not bundle the coaxial cable with the power cord or other cables.

If the antenna is not installed correctly, contact qualified service personnel

to correct the problem.

Connecting a VCR

To connect a VCR:

1 Make sure that your TV’s power cord is unplugged and the VCR is

turned off.

2 Connect an AV cable to the AV VIDEO OUT jack on the VCR.

3 Connect the other end of the cable to the Video1 or Video2 jack

on the side of your TV.

4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR.
5 Connect the other end of the cable to the Video1 or Video2

audio in jacks on the side of your TV.

To play from the VCR:

1 Turn on your TV, then press INPUT. The INPUT SOURCE menu

opens.

2 Press

select

Video1 or Video2, then press ENTER.

Note: You can also press VIDEO once for Video1 or twice for Video2.

3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.

Home antenna
terminal (75 ohm)

ANT. jack

Twin-lead flat cable

RF coaxial cable (75 ohm)

Twin-lead flat cable

Combiner (not provided)

300-75 ohm Adapter
(not provided)

VHF antenna

UHF antenna

VHF, UHF, or
combination
antenna

ANT/CABLE IN

Antenna, cable
TV, or satellite box

Back of TV

Side of TV

AV cable

Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 8 Wednesday, May 13, 2009 11:38 AM