ABtUS AV817 - Manual (Page 6)

User Operation Guide
1. Parts Assembly - Installation of Universal Base
1.2
Lift the Projector with both middle fi nger
along the depth of the Projector to
search for the Cental of gravity (CG).
1.4
Remote M8 Hexigan Nut and M8x50
Socket Screw from Part-8 as shown
below.
1.6
Loosen and slide the Extension
Brackets on the Universal Head
Assembly and align them to the
Projector mounting holes
1.1
Lift the Projector with both middle fi nger
along the depth od the Projector to
search for the Central of Gravity (CG).
1.3
When the CG Point (Depth of Projector)
and (Width of Projector) intersection
meet, that will be the assume CG of
Projector
1.5
Locate the Projector CG position and
determine screw size for mounting the
Projector by placing the Universal Head
Assembly near to the Projector CG
found in step-1.3
CG of Projector
CG Point
(Width of Projector)
CG Point
(Depth of Projector)
INSTALLATION GUIDE