ABtUS AV541 - Manual

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
Model: AV541
** For details and updated Command and Program Software,
please visit and download from www.abtussingapore.com
*Specifi cations are subject to changes without notice.
Revision 0
LCD/LED
Monitor Display
Double Arm Wall Mount
INSTALLATION GUIDES:
Figure 4
Step 3:
You can adjust the viewing angle by adjusting the display screen directly. If it is too loose, you
can tighten the nuts by wrench as the below drawing shown. (Figure4)
PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TV MOUNTS
TO THE BACK PANEL OF TV IN STEP 2 . MAKE SURE THE APPROPRIATE
MOUNT HARDWARE IS BEING USED PROPERLY .
1. Select correct Mounting Hardware according to the screw hole size of your TV, discard any
remaining screws or spacers.
2. Carefully lay your TV on its face on a non-abrasive surface, making sure to lay padding
underneath it so as not to damage the screen .
3. Place left TV mount and right mount in the approriate position, making sure CENTERED on
the back of the TV and LEVEL with on another
±360°
±90°
C
-15°
+15°