MIPRO act707s-ii(2ce149)b - Manual (Page 7)

1 0 11
ACT SINGLE CHANNEL WIRELESS RECEIVER ACT SINGLE CHANNEL WIRELESS RECEIVER
FREQ MENU
(2) FREQ: Indicates the frequency that is currently in use.
A. Operating Procedures.
B. How to Operate?
a. After push "MENU" button and select the "FREQ" frame, it will show the frequency
that is set under the GROUP and CHANNEL that one had selected previously.
B. The operation only for displaying frequency, not for the function of changing
frequency.
(3) SQ: Indicates or setups the Squelch level.
a. User can set the squelch level within the range of 01-99.
b. To set the squelch level, simply b y pushing the "UP" or "DOWN" button andconfirm
the modification by pushing "MENU" button.
c. The bigger the setting number, the lower the sensitivity.
(4) VOL: Indicates Volume Level is a t O n or Mute position.
A. Operating Procedures.
B. How to Operate?
The operation provids mute control switch
Push "UP " or "DOWN " Button allows one to switch volume to "ON" or "Mute" status.
A. Operating Procedures.
B. How to Operate?
AF bar and Ant. A, B of LCD panel will not displayed when t h e receivermodule is
at Mute status. To ascertain ifreceiver is at Mutestatus, press M e n u key, select
Volume. If LCD indicates "Mute" it is a Mute status. If LC D indicates "On" audio is
operating normally.
C. CAUTIONS :
SQ MENU 01 EXIT MENU
DOWN UP Save
VOL MENU MUTE EXIT
DOWN UP
ACT
MENU
GROUP
SCAN
ACT
MENU
GROUP
SCAN
ACT
MENU
GROUP
SCAN