Optoma HQView520 - Manual (Page 8)

© Calibre UK Limited Issue 2.30 22 nd April 2013
4
HQVIEW-5XX SYSTEM DESCRIPTION
2.1. Product Overview
HQView-5xx is designed to accept the following input signals:

Composite video via BNC

Composite video via RCA

S-Video via 4-way miniDIN

YPbPr or RGBS or RGsB SD/ED/HD component video via 3 or 4 BNC connectors

3G-SDI/HD-SDI/SDI (Serial Digital Interface) via BNC

VGA/SVGA analogue (computer interface) via 15HDD

DVI (Digital Visual Interface) via DVI-I (supporting a digital and 2
nd
analogue VGA input)

HDMI via HDMI connector
2.2. Product Specification
This section provides technical details for all possible inputs.
Please note that not all possible input options are applicable to all output formats.
2.2.1.
Power Supply Requirement
100V-264VAC 50/60Hz connected via a standard IEC connector located on the rear panel.
2.2.2. Video Inputs
Composite via BNC and RCA connector, S-Video via 4-way mini DIN socket
Signal formats
Composite (CVBS), S-Video (Y/C)
Standards NTSC, PAL, SECAM
Composite (CVBS) input level 1V p-p nominal incl. sync
Luminance (Y) input level 1V p-p nominal incl. sync
Chrominance (C) input level 0.6V p-p nominal
Input Impedance (all inputs) 75 Ohms
2.2.3. Component Video Inputs
Via 3 or 4 BNC connectors
YPbPr (YUV), YPbPrS, RGsB and RGBS component video, menu selectable.
Signal formats 484i (480i) and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and
1080p at 23.98, 24, 25, 29.97 and 30Hz.
Please note this input does not support Computer SVGA signals which should be connected via the
Computer SVGA input, The SVGA input supports the separate H & V syncs.
2.2.4.
3G-SDI Input
Format: SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video
Input impedance: 75 ohms.
SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and 1080p
single link formats at 270Mb, 1.485Gb or 2.97Gb rates.