Optoma HQView520 User Manual
Page 2
©
Calibre UK Limited Issue 2.40 21
st
April 2013
This manual explains how to operate your HQView-500 Series (HQView-5xx) image scaler. The
HQView-500 Series comes in four versions HQView-500S, HQView-510, HQView-520 and
HQView-530.
HQView-5xx processors are designed to provide users with a powerful and flexible method of
driving large display devices, and multiple screen applications including flexible geometry
correction functions, soft edge blending and projection mapping.
If you have any queries relating to this or any other product supplied by Calibre please visit
our w
COPYRIGHT
This document and the software described within it are copyrighted with all rights reserved. Under
copyright laws, neither the documentation nor the software may be copied, photocopied, reproduced,
translated, or reduced to electronic medium or machine readable form, in whole or in part, without
prior written consent of Calibre UK Ltd ("Calibre"). Failure to comply with this condition may result in
prosecution.
Calibre does not warrant that this product package will function properly in every hardware/software
environment.
Although Calibre has tested the hardware, firmware, software and reviewed the documentation,
CALIBRE MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED,
WITH RESPECT TO THIS HARDWARE, FIRMWARE, SOFTWARE OR DOCUMENTATION, THEIR
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THIS SOFTWARE AND DOCUMENTATION ARE LICENSED 'AS IS', AND YOU, THE LICENSEE,
BY MAKING USE THEREOF, ARE ASSUMING THE ENTIRE RISK AS TO THEIR QUALITY AND
PERFORMANCE.
IN NO EVENT WILL CALIBRE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE OR DOCUMENTATION, even if advised of the possibility of such damages. In
particular, and without prejudice to the generality of the foregoing, Calibre has no liability for any
programs or data stored or used with Calibre software, including costs of recovering such programs or
data.
Optoma Europe Ltd.
Optoma USA
42 Caxton Way
3178 Laurelview Ct.
The Watford Business Park
Freemont,
Watford
California.
Hertfordshire
WD18 8QZ
CA 94538,
UK
USA
Support:
UK 0845 072 7336
USA www.optomausa.com
Europe/Middle East/Africa + 44 (0) 1923 691 869 Phone 888-289-6786
Service: + 44 (0) 1923 691 865 Fax 510-897-8601
Copyright
(c) 2013
All World-wide Rights Reserved
All trade marks acknowledged
Calibre operates a policy of continued product improvement, therefore specifications are subject to
change without notice as products are updated or revised.
E&OE.