Subaru 2006 Impreza WRX - Manual (Page 265)

9-10
In case of emergency
1) Booster battery
2) Engine lifting bracket
3
4
2
1
1
2
900270
1)Connect one jumper cable to the pos-
itive (+) terminal on the discharged bat-
tery.
2)Connect the other end of the jumper
cable to the positive (+) terminal of the
booster battery.
3)Connect one end of the other cable to
the negative (–) terminal of the booster
battery.
4)Connect the other end of the cable to
the engine lifting bracket.
Make sure that the cables are not near
any moving parts and that the cable
clamps are not in contact with any other
metal.
5. Start the engine of the vehicle with the
booster battery and run it at moderate
speed. Then start the engine of the vehi-
cle that has the discharged battery.
6. When finished, carefully disconnect
the cables in exactly the reverse order.