Subaru 2007 Impreza WRX - Manual (Page 327)

Black plate (335,1)
北米Model "A1920BE-B" EDITED: 2006/ 9/ 19
7. Put the rear combination light assem-
bly into place while aligning the clip with
the guide on the vehicle and fasten the
bolts.
8. Install the side cover and secure it with
the clips.
& License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens.
5. Tighten the mounting screws.
& Dome light, map light and
cargo area light
Maintenance and service
11-51
– CONTINUED –
11