Subaru 2008 Forester 2.5X - Manual (Page 331)

Black plate (340,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
11-50
Maintenance and service
& Rear combination lights
1. Remove the upper and lower screws.
Then, slide the rear combination lamp
assembly to the rear and remove it from
the vehicle.
1) Tail/stop light
2) Backup light
3) Rear turn signal light
4) Tail/stop light
2. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
3. Pull the bulb from the holder. Install a
new bulb.
4. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
5. Reinstall the rear combination light
assembly.
& License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.