Subaru 2009 Legacy - Manual (Page 31)

Black plate (31,1)
北米Model "A2450BE-A" EDITED: 2008/ 3/ 24
To adjust the angle of the seatback, move
the control switch.
! Seat cushion angle adjustment
(driver ’s seat)
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
! Seat height adjustment (driver’s
seat)
To adjust the seat height, pull up or push
down the rear end of the control switch.
& Memory function (driver’s
seat — if equipped)
Two of your favorite seat positions can be
registered. Register the seat position with
button
“1” or “2” and retrieve the seat
position by pressing either button.
The following seat positions can be
registered:
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position
WARNING
. Never adjust the seat while driv-
ing to avoid the possibility of
loss of vehicle control and of
personal injury.
. Before adjusting the seat, make
sure the hands, feet and posses-
sions of rear seat passengers are
clear of the adjusting mechan-
ism.
. Before registering the seat posi-
tion, confirm that the shift lever is
in the
“P” position (AT models) or
the parking brake lever is applied
(MT models).
1. Shift the shift lever in the “P” position
(AT models) or apply the parking brake
(MT models).
2. Adjust the seat position.
Seat, seatbelt and SRS airbags
1-5
– CONTINUED –
1