Subaru 2009 Legacy User Manual
Page 134
Black plate (137,1)
北米Model "A2450BE-A" EDITED: 2008/ 3/ 24
off.
NOTE
If the connection between the combina-
tion meter and battery is broken for any
reason such as vehicle maintenance or
fuse replacement, the data recorded on
the trip meter will be lost.
& Current and average fuel
consumption
U.S.-spec. models
Canada-spec. models
1)
Current fuel consumption
2)
Average fuel consumption
Current fuel consumption shows the rate
of fuel consumption at the present mo-
ment. Average fuel consumption shows
the average rate of fuel consumption since
the trip meter was last reset.
When the vehicle speed is less than
approximately 6 mph (9.5 km/h), the
current fuel consumption is not displayed.
The displayed number with
“A” is the
average fuel consumption corresponding
to the A trip meter indication, and the
displayed number with
“B” is the average
fuel consumption corresponding to the B
trip meter indication.
Those A and B indications can be
changed by depressing the trip knob.
When either of the trip meter indications is
reset, the corresponding average fuel
consumption value is also reset.
NOTE
. The indicated values vary in accor-
dance with changes in the vehicle
’s
running conditions. Also, the indicated
values may differ slightly from the
actual values and should thus be
treated only as a guide.
. When either trip meter indication is
reset, the average fuel consumption
corresponding to that trip meter indica-
tion is not shown until the vehicle has
subsequently covered a distance of 1
mile (or 1 km).
Instruments and controls
3-11
– CONTINUED –
3